You can configure Static IP over the Wi-Fi backhaul in sensors running Black Panther firmware version 5.1.0 or later. This feature expands our Static IP Interface options, making it easier for you to customize network settings to your environment.
To Set a Static IP on Wi-Fi Backhaul
- Log in to the BlueZoo Dashboard
-
Navigate to Sensor Hardware section from the left menu:
- Find the sensor you wish to configure and open its Hardware Properties section.
- Set the edit Static IP Interface, enable static IP and select Wi-Fi.
-
Configure Static IP Settings:
- Enter the required static IP configuration details, including:
- IP Address
- Subnet Mask
- Gateway
- DNS Servers
- Enter the required static IP configuration details, including:
- Apply Changes: Click on "Save" to apply your settings. The sensor will automatically update and start using the static IP.
Notes:
- Ensure the Wi-Fi network is stable and the configured static IP does not conflict with other devices on the network.
If you experience issues configuring Static IP over Wi-Fi or have additional questions, our support team is here to help! Contact us at support@bluezoo.io.
Comments
0 comments
Please sign in to leave a comment.