If using Wi-Fi backhaul with Arctic Fox, make sure the Wi-Fi dongle is plugged into the sensor as shown above - Black Panther and Yellow Mongoose sensors do not require a Wi-Fi dongle. Then, plug in the USB cable connected to the power adapter to power on the device.
If you use Ethernet as your Internet backhaul, wait a minute or so, and you should see a green light in the middle position (white on the Yellow Mongoose model). This indicates that your sensor is working properly and communicating with the BlueFox cloud. Add the sensor to your account by either using the BlueZoo dashboard or the BlueZoo Foot Traffic Analytics mobile app.
If you want to use Wi-Fi as your Internet backhaul, you can configure it during the sensor on-boarding process with the BlueZoo Foot Traffic Analytics mobile app.
Article is closed for comments.